Blog Machine Guides

Stirrup Bending Machine: How It Works and What to Expect After Purchase

· Site Administrator · 3 min read · Ref: fmabblog1205

stirrup bending machine supplied by food mart agro bhopal bhopal

From the order to the first production run — how the Stirrup Bending Machine comes together, what to prepare, and what happens during installation and commissio

Buying a machine is only half the story - the questions start the day it arrives. This article covers how a Stirrup Bending Machine purchase flows in practice: what to prepare before delivery, what to expect during installation, and how you move from unpacking to production output.

The Stirrup Bending Machine (Model TRBM-500) is a purpose-built stirrup making machine for column and beam reinforcement. It bends 8 mm to 12 mm TMT bars into closed links and stirrups in multiple adjustable sizes, giving building contractors and fabrication units an efficient way to produce the large number of ties that RCC columns and beams require. Unlike general bar benders, this machine is tuned for stirrup box .

Before the machine arrives

Get the power connection ready, clear the space where the Stirrup Bending Machine will sit, and keep the access path open for delivery. Confirm voltage and any three-phase requirement from the specification so the machine starts running the day it is installed.

Installation and commissioning

Food Mart Agro Bhopal schedules delivery, installation and operator training as part of the order. During commissioning the team sets the machine up to your requirement, shows your operator the daily routine, and checks the first runs so you are comfortable before they hand it over.

What makes it easy to run

  • High stirrup output: fast production of closed links for columns and beams.
  • Adjustable stirrup sizes: set box dimensions for different member sizes.
  • 8 mm - 12 mm bar range: covers the stirrup bars most used in buildings.
  • Automated repeat bending: semi automatic cycle keeps every stirrup the same size.
  • Compact and portable: easy to move between building floors and yards.
  • Low operating cost: 1.5 HP motor on 415 V (220 V option) keeps power bills low.
  • Simple controls: short training time for operators.

Specification for your setup planning

Technical specifications at a glance

Machine TypeStirrup Bending Machine
AutomationSemi Automatic
Bar Diameter8 mm - 12 mm
Stirrup Size RangeMultiple adjustable sizes
Production CapacityMedium
Motor Power1.5 HP (approx.)
Voltage415 V, Three Phase (optional 220 V)
Frequency50 Hz
Warranty12 months
ApplicationColumn & beam stirrups

Moving into regular production

Once commissioned, the machine is best eased into the regular production load. Keep the daily cleaning and the supplier’s operating notes handy, and track output for the first week so any tuning is caught early. The machine carries a 12-month warranty, and the supplier remains available for spares and service afterwards.

The Stirrup Bending Machine is starting from around Rs. 40,000.

To plan the arrival of your Stirrup Bending Machine, reach Food Mart Agro Bhopal through the contact page and share your site condition - the delivery and setup can be scheduled around it.

Key facts about the Stirrup Bending Machine

  • Category: Rebar & TMT Bending Machines
  • Reference (SKU): FMA-00174
  • Price basis: The Stirrup Bending Machine is starting from around Rs. 40,000.
  • Warranty: a 12-month warranty
  • Availability: supplied from Bhopal, Madhya Pradesh with delivery and installation arranged across India, Nepal and Bhutan.

See the full product page for the Stirrup Bending Machine here, or compare it with other machines in the Rebar & TMT Bending Machines range. For a configuration-matched written quotation, use the Get a Quote form or contact the team.

More machine guides and buying advice are available on the Food Mart Agro Bhopal blog.

Need this machine?

Send your product and capacity. We reply with model options, power details and the latest price.

Get a Quote

Questions About This Topic

Straight answers about machine supply, pricing, delivery and support.

How long does installation of the Stirrup Bending Machine take?
Installation and commissioning are scheduled to your site. The time depends on the site readiness and the scope of commissioning included in the order.
Do I need anything ready before delivery?
Have the power connection ready, keep floor space clear and ensure a clear path for the machine to reach the installation spot. The supplier confirms exact requirements before dispatch.
Is operator training provided?
Yes. Operator training is arranged as part of the commissioning, covering the daily routine, settings and upkeep of the Stirrup Bending Machine.
What happens after installation if I need support?
The supplier stays available for spares, service and guidance, and the machine is covered by a 12-month warranty.

Machines Mentioned In This Article

All machines

More Articles

Chat with us
+91 75100 03861 +91 78801 17935
Call WhatsApp Get Quote