From the order to the first production run — how the TMT Bar Bending Machine (Stirrup Maker) comes together, what to prepare, and what happens during installati
Buying a machine is only half the story - the questions start the day it arrives. This article covers how a TMT Bar Bending Machine (Stirrup Maker) purchase flows in practice: what to prepare before delivery, what to expect during installation, and how you move from unpacking to production output.
The TMT Bar Bending Machine (Model TRBM-400) is a versatile bar bending machine built for construction sites and bar yards. It bends 8 mm to 16 mm TMT bars into hooks, cranks, closed rings and stirrups with repeatable accuracy. Because it offers multiple preset bending angles, one machine replaces several slow manual bending arrangements and improves rebar output on any site. Contractors use this stirrup maker to pre.
Before the machine arrives
Get the power connection ready, clear the space where the TMT Bar Bending Machine (Stirrup Maker) will sit, and keep the access path open for delivery. Confirm voltage and any three-phase requirement from the specification so the machine starts running the day it is installed.
Installation and commissioning
Food Mart Agro Bhopal schedules delivery, installation and operator training as part of the order. During commissioning the team sets the machine up to your requirement, shows your operator the daily routine, and checks the first runs so you are comfortable before they hand it over.
What makes it easy to run
- Multiple preset angles: mark 90, 135, 180 and other common bend angles and repeat them consistently.
- Wide bar range: bends 8 mm, 10 mm, 12 mm and 16 mm TMT bars.
- Hooks, cranks and rings: forms the standard shapes needed for beam and column reinforcement.
- Stirrup production: closed links and stirrups in adjustable sizes for RCC frames.
- Sturdy construction: heavy-duty body and rollers for daily site use.
- 1.5 HP motor: adequate bending torque with low power cost.
- Simple operation: an ordinary worker can operate the machine after short guidance.
Specification for your setup planning
Technical specifications at a glance
| Machine Type | TMT Bar Bending Machine |
|---|---|
| Automation | Semi Automatic |
| Bar Diameter | 8 mm - 16 mm |
| Bending Angle | Multiple preset angles |
| Production Capacity | Medium |
| Motor Power | 1.5 HP (approx.) |
| Voltage | 415 V, Three Phase (optional 220 V) |
| Frequency | 50 Hz |
| Warranty | 12 months |
| Application | Hooks, cranks, stirrups and rings |
Moving into regular production
Once commissioned, the machine is best eased into the regular production load. Keep the daily cleaning and the supplier’s operating notes handy, and track output for the first week so any tuning is caught early. The machine carries a 12-month warranty, and the supplier remains available for spares and service afterwards.
The TMT Bar Bending Machine (Stirrup Maker) is starting from around Rs. 40,000.
To plan the arrival of your TMT Bar Bending Machine (Stirrup Maker), reach Food Mart Agro Bhopal through the contact page and share your site condition - the delivery and setup can be scheduled around it.
Key facts about the TMT Bar Bending Machine (Stirrup Maker)
- Category: Rebar & TMT Bending Machines
- Reference (SKU): FMA-00177
- Price basis: The TMT Bar Bending Machine (Stirrup Maker) is starting from around Rs. 40,000.
- Warranty: a 12-month warranty
- Availability: supplied from Bhopal, Madhya Pradesh with delivery and installation arranged across India, Nepal and Bhutan.
See the full product page for the TMT Bar Bending Machine (Stirrup Maker) here, or compare it with other machines in the Rebar & TMT Bending Machines range. For a configuration-matched written quotation, use the Get a Quote form or contact the team.
More machine guides and buying advice are available on the Food Mart Agro Bhopal blog.
Need this machine?
Send your product and capacity. We reply with model options, power details and the latest price.